您好,欢迎访问禹城泰瑞彩钢复合板加工厂!

服务热线

18765446878

热门关键词:禹城彩钢厂,禹城彩钢复合板,禹城钢结构板房 彩钢板房
当前位置:首页>新闻资讯>新闻动态彩钢活动房对装配地点和环境的要求是什么

彩钢活动房对装配地点和环境的要求是什么

来源:http://www.lxcaigang.com 日期:2021-02-22 发布人:
彩钢活动房现在很常见了,虽然重量轻,但构造全体性佳,抗震性佳,房子可多差拆装,屡差运用率高。要注意的是,在彩钢活动房对装配地点和环境是有一定要要求的。
Color steel activity room is now very common, although the weight is light, but the structure of the whole is good, earthquake resistance is good, the house can be more poor disassembly, repeatedly poor utilization rate is high. It should be noted that in the color steel activity room, there are certain requirements for the assembly site and environment.
1.地基的硬度:在浇注底子前,要事前测量佳地基的硬度,如有地形特殊或地基硬度相次太大,务必作特殊处理,以确保板房能顺利装配和保障装配后的质量,如何特殊处理,与技能部沟通。
1. Hardness of foundation: before pouring the foundation, it is necessary to measure the hardness of the foundation in advance. If the terrain is special or the hardness of the foundation is too large, special treatment must be done to ensure the smooth assembly of the prefabricated house and guarantee the quality after assembly. How to deal with the special treatment, communicate with the skill department.
2.底子的程度:在底子浇注时,必定要测量佳程度,底子浇注完后,程度误次操纵在10MM以内。
2. The degree of the base: when the base is poured, it is necessary to measure the good degree. After the base is poured, the degree of error control is within 10 mm.
3.混泥土标号:大局部尺度板房底子为C20。平常情况下内无钢筋,如有地形、地基特殊情况或板房有特殊要求,应以技能部出图为准。
3. Concrete grade: the bottom of slab house is C20. Under normal circumstances, there is no reinforcement inside. In case of terrain, special foundation conditions or special requirements for prefabricated house, the drawing of skill department shall prevail.
4.底子浇注时间:彩钢活动房的底子浇注应与惯例的混泥土浇注工艺一样,不可减少工艺秩序。在底子浇注完成到板房装配之间应留有充沛时间,以确保混泥土到达必定的硬度。
4. Base pouring time: the base pouring of color steel activity room should be the same as the conventional concrete pouring process, which can not reduce the process order. Sufficient time should be left between the completion of the base pouring and the assembly of the board house to ensure that the concrete reaches a certain hardness.
5.要求:为保障装配工期,装配质量和装配后整洁美观,在制造底子的同时,把室内地面也一并浇注完成,程度高度与底子一样,在板房装配完成后,在室内铺地板既方便,又整洁,也不会影响板房的质量和外观。室内地板的高度应比底子程度高度高出50MM,以确保雨水不会流入室内和地圈梁的坚实水平。
5. Requirements: in order to ensure the assembly period, the assembly quality and the neatness and beauty after assembly, the indoor floor is poured at the same time as the base, and the height is the same as the base. After the assembly of the board room, it is convenient and neat to lay the floor indoors, and it will not affect the quality and appearance of the board room. The height of the indoor floor should be 50 mm higher than the height of the base to ensure that the rainwater will not flow into the solid level of the indoor and ground ring beams.

联系电话:18765446878

咨询热线:18765446878(微信同号)

地址:禹城市十里望镇山东国际商贸港往南660米

备案号:鲁ICP备2023024436号 鲁公网安备37010202001695号 网站地图|XML|TXT

微信二维码

微信二维码