In city construction site, flammable materials such as polystyrene and polyurethane foam are used everywhere. After the fire, the speed of spread is fast, the combustion products are very toxic, and it is easy to cause significant property losses and casualties. Therefore, to do a good job in the basic fire safety management, the following explains how to do a good job in the fire safety of prefabricated house.

1、在设计山东活动板房时，要严格执行《建筑设计防火规范》、《建设工程施工现场消防技术规范》等标准规范要求。新建、扩建、改建使用彩钢板的厂房、仓库、商店等建设工程和用作人员密集场所的临时性建筑，要按照执行《建设工程消防监督管理规定》要求，从源头加强彩钢板建筑消防管理。

1. In the design of prefabricated houses in Shandong Province, it is necessary to strictly implement the requirements of national standards such as "code for fire protection design of buildings", "technical code for fire safety of construction site". New construction projects such as factories, warehouses and shops using color steel plates and temporary buildings used as densely populated places shall be built, expanded and rebuilt in accordance with the requirements of the regulations on supervision and administration of fire protection in construction projects, and the fire safety management of color steel plate buildings shall be strengthened from the source.

2、认真落实消防责任制，加强使用者的消防意识，做好消防培训工作，提高保护意识。

2. We should conscientiously implement the fire safety responsibility system, strengthen the fire safety awareness of users, do a good job in fire safety training, and improve the protection awareness.

3、加强山东活动板房的日常消防管理，板房内禁止使用大功率电器，离开房间时及时断掉电源；禁止在房间内使用明火，禁止将活动板房作为厨房、配电房、易燃易爆用品库房等使用。

3. Strengthen the daily fire safety management of Shandong mobile board room, prohibit the use of high-power electrical appliances in the board room, cut off the power supply in time when leaving the room; prohibit the use of open fire in the room, prohibit the use of mobile board room as kitchen, power distribution room, inflammable and explosive supplies warehouse, etc.

4、电器线路的敷设必须符合规范要求，所有电线应明敷，并套以阻燃管，灯具与墙壁应保持距离，照明日光灯应使用电子镇流器型，不能采用线圈电感式镇流器，当电线穿过彩钢板夹芯板墙壁时，必须套以不燃塑管，每栋板房都要安装合格的漏电保护装置和短路过载开关。

4. The laying of electrical circuits must meet the requirements of specifications. All wires should be exposed and covered with flame-retardant tubes. Lamps should keep a safe distance from the wall. Electronic ballasts should be used for lighting fluorescent lamps instead of coil inductive ballasts. When the wires pass through the wall of color steel sandwich panel, non combustible plastic tubes must be used. Qualified leakage protection devices and short circuit protection devices should be installed in each board room Passing by the load switch.

更多获得活动板房信息，继续关注济南活动板房厂，持续为您更新更多板房和行业信息，欢迎致电。

To get more information about prefabricated house, continue to pay attention to Jinan prefabricated house factory, and continuously update more information about prefabricated house and industry for you, welcome to call.