工程板房经常出现在一些建筑工地路边角落里，常用作住所，在使用时比较方便，安装也比较快捷，受到大众广泛的欢迎。随着工程板房受到欢迎，开始出现的厂家也逐渐增多，常选择的种类有很多种，在选购时需要格外注意，
济南工程板房的购买要考虑到以下因素。
Project plank houses often appear in roadside corners of some construction sites and are often used as residences. They are more convenient to use and faster to install, and are widely welcomed by the public. With the popularity of prefabricated houses, more and more manufacturers have begun to appear. There are many kinds of commonly selected houses. Special attention should be paid to the purchase of prefabricated houses in Jinan. The following factors should be considered in the purchase of prefabricated houses in Jinan.
1、 注意配件的
1. Pay attention to the price of accessories
工程板房常见的选购配件有：天花吊顶，防盗网等。这些配件量虽少，却比较容易在这些方面“踩雷”。其中天花吊顶与防盗网的价钱的波动不大。在选购前须要事先了解，防止被抬价。
Common purchased accessories of project plank houses include ceiling, anti-theft net, etc. Although the number of these accessories is small, it is easier to "step on thunder" in these aspects. Among them, the price of ceiling and anti-theft net fluctuates little. It is necessary to know in advance before purchasing to prevent the price from being raised.
2、工程板房面积计算
2. Area calculation of project plank house
如果是标准型，按模数设计的工程板房，其面积是已经计算好的了，有工程板房面积对照表可查的。如果是异构型，则按规则计算。
If it is a standard type, the area of the prefabricated house designed according to the module has been calculated. There is a comparison table of the area of the prefabricated house. If it is heterogeneous, it is calculated according to rules.
3、注意C型钢的质量
3. Pay attention to the quality of C-section steel
工程板房的材料有很多，其中要注意的是两种材料：C型钢，彩钢夹芯板。
There are many materials for Engineering Plank houses, among which two materials should be paid attention to: C-shaped steel and color steel sandwich panel.
用于板房C型钢，为8#型，应用于地梁、立柱、圈梁、一字梁、楼面檩条等处，特别要留意立柱与一字梁处的C型钢。立柱与一字梁为板房结构的关键承受 力点，这两处应采用1.8mm厚度的双8#C型钢。其次要观察材料的表面涂料是否平整光滑，若将材料的表面涂料马虎了事，则板房表面容易氧化。
The C-section steel used for the plank house is 8 # type, which is applied to the ground beam, column, ring beam, I-beam, floor purlin, etc. pay special attention to the C-section steel at the column and I-beam. The column and I-beam are the key bearing points of the slab house structure, and double 8 # C-shaped steel with a thickness of 1.8mm shall be used at these two places. Secondly, it is necessary to observe whether the surface coating of the material is flat and smooth. If the surface coating of the material is careless, the surface of the prefabricated house is easy to be oxidized.
4、 注意双面彩钢夹芯板与PU瓦的钢板厚度
4. Pay attention to the steel plate thickness of double-sided color steel sandwich plate and Pu tile
双面彩钢夹芯板主要用于外墙，PU瓦用于屋顶，这两者在板房中大面积使用。这两者的钢板的标准厚度应为0.326mm。有些工程板房厂家采用0.286mm或更低规格的钢板，以降低材料成本，造成板房质量低下，损害客户的利益。
Double sided color steel sandwich panels are mainly used for exterior walls, and Pu tiles are used for roofs, which are widely used in prefabricated houses. The standard thickness of the steel plates for both should be 0.326mm. Some engineering plank house manufacturers use 0.286mm or lower steel plates to reduce material costs, resulting in low quality of plank houses and damaging the interests of customers.
5、 要求板房厂家提供基础图
5. The prefabricated house manufacturer is required to provide the foundation drawing
工程板房的场地基础要求不高，通常为带型混凝土基础，宽300mm，深300mm。与厂家商谈时，要明确地告诉厂家你的场地的情况，要求提供基础图进行设计。如果为填松土的话，正规的厂家会建设你把场地压严实，或增加带型基础的截面的宽度。基础已达到地耐力157/m2以上，确保整体基础不下沉。
The site foundation of the project slab house is not high, and it is usually a band type concrete foundation with a width of 300mm and a depth of 300mm. When talking with the manufacturer, you should clearly tell the manufacturer about your site and ask for the basic drawing for design. If it is to fill loose soil, regular manufacturers will build you to compact the site, or increase the width of the section of the belt foundation. The foundation has reached the ground endurance of more than 157 / m2 to ensure that the overall foundation does not sink.
以上就是在购买工程板房时需要考虑的一些点，在选购时需要格外注意以上几点，防止在购买时超出预算，在选购时考虑的这些因素也会影响到工程板房的质量，因此需要格外注意。更多相关内容就来我们网站
http://www.lxcaigang.com咨询看看吧！
The above are some points that need to be considered when purchasing engineering prefabricated houses. Special attention should be paid to the above points when purchasing to prevent exceeding the budget when purchasing. These factors also affect the quality of Engineering prefabricated houses, so special attention should be paid. For more information, please visit our website http://www.lxcaigang.com Consult!
